Show All

Karmet  was founded at the end of 2005 at Saray village of Kazan-Ankara. The firm has been working in 15000 m2 closed and 3000 m2 open area. Main activity of Karmet is CAD-CAM supported machine construction such as CNC cabinets, compressor cabinets, electronic device cabs and different kind of accessory. Karmet also has an R&D department to search on electromechanic and energy systems. One of the products of R&D is EKM Electronic Compensation Modules that correct power factor very fast, accurate and seperately each phase.

The fabric has two CNC laser cutting, CNC punch, CNC bending machines, NC shear, Tig-Mig welding, any kind of surface smoothing devices, Oil cleaning bath, Zinch-phosphate bath, Electrostatic painting and Asslembly line.

 

We are closely follow the technology and apply on the production, as well as improve our technicans to produce perfect products for our customers. Our aim is permanent customer satisfaction.
Our R&D department design advanced products by experienced staff. R&D department is experienced both at software and hardware. The firm supplies the excellent solutions for power factor correction by EKM and EKT.

 

CAD / Designtasarım

Our expert staff prepare technical drawings for our customers prototype or product. If the technical drawings are available, it is controlled and corrected if needed. Then the cutting plans for CAM are prepared. 

 

 

 


 

 CAM / Productionimalat

Cutting: The most proper cutting method for the technical drawing is choosen and the cutting program is prepared. Then the program is send to CNC laser, CNC punch nor NC shear.

Bending: After cutting of the parts, they are bended at CNC bending according to specification. Then sent to next process.

 

 


 

Welding-Surface smoothingkaynak

The weldings on the part are complated according to technical part drawing. The parts could be from SS, ST or Alaminium. then the surfaces corrected if needed and to correct dimension. 

 

 

 

 

 


 

Before paint-Paintboya

At this step the parts are cleaned firstly against the dirt, oil etc. Then the surfaces of material, if ST, coated Zinch-Phosphate. Then the parts are left to dry. After that the parts are coated with electrostatic paint. The parts are then put into an oven for specified time and temperature. 

 

 

 

 


 

 Assemblymontaj

The parts from oven sent to assembly area. There with qualified persons all parts are assembled. Final check and quality control are done here. After this the products are packaged to load on truck.

 

 

 

 

 


 

Quality Controlkumpas

Each department taken the parts controls them against any fault. If any deviation found on the parts and technical drawing then it is reported to previous department. Then either the parts are corrected or dispossed. Final control for the whole product are done at the assembly for paint and dimensional.  

 

 

 


 

Mechanical Production

All kinf of mechanical construction and accessories. 

 

Karmet  Makina Elektronik Tasarım San. Ve Tic. A.S.
Address: Modern Keresteciler Sanayi sitesi 1.
Cadde 23 Sokak No:14 Saray, Kazan/ANKARA
Phone: +90 312 815 12 12 (pbx)
Fax: +90 312 815 12 16
E-mail: info@karmetmakina.com.tr

Sales: fgul@karmetmakina.com.tr

R&D: arge@karmetmakina.com.tr

Serviceservis@karmetmakina.com.tr

 

Group Companies

OES Ortadoğu Elektronik San. Tic. Ltd. Şti

Tel: +90 312 2567755

Faks: +90 312 2561939

www.gess.com.tr

 

PMI Elektrik ve Elektronik Sistemleri Dis Tic. Ltd. Sti.

Tel : +90 212 320 35 95 - 320 35 96

Fax : +90 212 320 35 97

www.pmienergy.com

Mechanical Production Customers

Please call for sectoral referance list.

Northel Enerji A.Ş. (Balıkesir)-0266 3315770- 24/09/2014

EKT 79 PFC set up for wind turbine aplication.

Northel Enerji A.Ş. (Balıkesir)-0266 3315770- 01/04/2014

EKT 39 set up for wind turbin.

Power Elektronik Ltd Şti (İstanbul) 0216 4816699- 05/02/2014

EKT 35 set-up

Ezelsan Elektrik Ltd Şti (Mardin) 0482 3123777 -17/01/2014

EKT 310 set up.

Yesa Enerji Mühendislik Ltd Şti (İstanbul) 0212 8720808- 27/12/2013

EKM 45 PFC module

Yesa Enerji Mühendislik Ltd Şti (İstanbul) 0212 8720808- 17/12/2013

EKT 620 PFC control and switching module..

Lionweld Meiser LLC (Dubai)-23/12/2013

2 Pieces EKD 700 production for diphase spot welding device.

Northel Enerji A.Ş. (Balıkesir)-0266 3315770- 14/11/2013

EKT 150 PFC for wind turbine..

Yesa Enerji Mühendislik Ltd Şti (İstanbul) 0212 8720808- 01/11/2013

EKM180 electronic control and switching module supply..

Northel Enerji A.Ş. (Balıkesir)-0266 3315770- 23/10/2013

EKT 235 PFC supply for wind turbine.

Kaleliler Bağlantı Elemanları Ltd Şti (Ankara)-0312 354 95 34 - 12/09/2013

EKM 180 set up..

Yesa Enerji Mühendislik Ltd Şti (İstanbul) 0212 8720808- 10/09/2013

EKM945 control and switching modue supply..

Mayda Toz Metalürji Ltd Şti (Bursa)-0224 4111904- 27/08/2013

EKM 360 set up, 2 kvar correction step and 64 step.

Yesa Enerji Mühendislik Ltd Şti (İstanbul) 0212 8720808- 22/08/2013

EKM 945 control and switching module supply..

İpekyol Beton Ltd Şti. (Urfa)- 0414 5113408 - 10/07/13

EKT 230 set up.

Yesa Enerji Mühendislik Ltd Şti (İstanbul) 0212 8720808- 21/06/2013

EKT470 control and switching module supply.

Northel Enerji A.Ş. (Balıkesir)-0266 3315770- 23/05/2013

EKT 28,5 PFC for wind turbine PFC.

Yesa Enerji Mühendislik Ltd Şti (İstanbul) 0212 8720808- 02/05/2013

EKT 310 Thyristor swithcing and control module supply.

Göktel Elektrik ( Kars) - 0474 2231298 - 11/03/2013

EKM 180 set-up

Yesa Enerji Mühendislik Ltd Şti (İstanbul) 0212 8720808- 07/03/2013

EKT 620 control and switching module supply.

Northel Enerji A.Ş. (Balıkesir)-0266 3315770- 18/03/2013

EKM 235 set-up for wind turbine PFC.

Esen-El Mühendislik Ltd. Şti. (İstanbul) -0212 8861313- 19/03/2013

EKM 45 set-up.

Yesa Enerji Mühendislik Ltd Şti (İstanbul) 0212 8720808- 28/02/2013

EKM45 set-up.

Yesa Enerji Mühendislik Ltd Şti (İstanbul) 0212 8720808- 16/01/2013

EKT 620 control and switching module supply.

İdil Produksiyon Ltd Şti. (Ankara) 0312 4465758- 15/01/2013

EKM22,5 PFC

Eryap İnş. Ta. Ltd. Şti. 0216 493 15 33 (Northel Enerji A.Ş.-0266 3315770)- 15/01/2013

EKT 250 PFC for wind turbine.

Gürerel Elektrik Elektronik Ltd Şti (Adana-Kareks A.Ş.) 0322 421 0465- 07/01/2013

2 pieces EKD30/60 PFC workin on-off for spot welding devices.

Yesa Enerji Mühendislik Ltd Şti (İstanbul) 0212 8720808- 04/01/2013

EKT620 elektronic control module supply.

Yesa Enerji Mühendislik Ltd Şti (İstanbul) 0212 8720808- 30/11/2012

EKM 45 PFC device, EKM135 and EKT235 Control Module supply.

Yesa Enerji Mühendislik Ltd Şti (İstanbul) 0212 8720808- 23/11/2012

EKM90 set-up.

Northel Enerji A.Ş. (Balıkesir)-0266 3315770-07/11/2012

EKT 28,5 for wind turbine PFC.

Yesa Enerji Mühendislik Ltd Şti (İstanbul) 0212 8720808- 23/10/2012

EKM 90 control module supply.

Aslan Elektrik (Çorlu)-0282 6544517-09/10/2012

EKT230 set-up. 5 kvar correction step and 20 ms correction speed.

Yesa Enerji Mühendislik Ltd Şti (İstanbul) 0212 8720808- 07/09/2012

EKT 230 Thyristor module supply.

Northel Enerji A.Ş. (Balıkesir)-0266 3315770-02/10/2012

2,5 kvar step correcion EKT 47,5 PFC for wind turbine.

Yesa Enerji Mühendislik Ltd Şti (İstanbul) 0212 8720808- 17/09/2012

EKm 270 and EKM 90 thyristor module production.

Yesa Enerji Mühendislik Ltd Şti (İstanbul) 0212 8720808 -17-27/08/2012

EKT 230 and EKT 620 thyristor module production.

Gürerel Elektrik Elektronik Ltd Şti (Adana-Kareks A.Ş.) 0322 421 0465- 29/08/2012

EKD 60 on-off local Thyristor controlled PFC..

Northel Enerji A.Ş. (Balıkesir)-0266 3315770- 24/08/2012

2,5 kvar step correction device EKT 27,5 for Wind Turbine PFC.

GMT Genel Makina Ltd Şti.(Ankara) 0312 6401630-15/08/2012

EKT460 PFC set-up, 10 kvar correciton step and 20 ms correction speed.

Northel Enerji A.Ş. (Balıkesir)-0266 3315770- 22/06/12

EKT97 set up for wind turbine PFC.

Yesa Enerji Mühendislik Ltd Şti (İstanbul) 0212 8720808 -22/06/2012

EKM90, EKT235 ve EKT 460 PFC control module supply..

Aslan Mühendislik (Trabzon Liman İşletmesi) - 0462 2291153-14/06/2012

EKT 620 set up for local PFC of a crane at Trabzon Harbour.

İpekyol Beton Ltd Şti. (Urfa)- 0414 5113408 - 15/05/12

Two pieces EKT620 PFC.

Güven İskele Ltd Şti. (Ankara)-0312 8143545- 02/05/12

EKT 150 set-up, 2,5 kvar correction step 64 step PFC.

Northel Enerji A.Ş. (Balıkesir)-0266 3315770- 20/04/12

EKT115 set-up, 2,5 kvar step correction and 64 step correction.

Yesa Enerji Mühendislik Ltd Şti (İstanbul) 0212 8720808 -06/04/2012

EKM 45 control module and thyristor module set-up.

Gürerel Elektrik Elektronik Ltd Şti (Adana) 0322 421 0465-03/04/2012

EKT150 and EKT 75 set-up, 2,5 kvar step correction and 64 and 32 step.

Form Metal Makina San Ltd Şit (Ankara) - 0312 2670741-16/03/12

EKT110 set-up, 2,5 kvar step correction and 47 step.

Gürerel Elektrik Elektronik Ltd Şti (Adana) 0322 421 0465-12/03/12

EKM11 set-up, 0,25 kvar step correction and 16 step. PFC device for GSM aplication..

Elit Grup Isı Sis. Ltd Şti (Ankara)-0312 8151105- 11/03/12

EKM45 set-up, 0,5 kvar step correction and 32 step PFC.

Yesa Enerji Mühendislik Ltd Şti (İstanbul) 0212 8720808 -28/02/2012

EKM 360 control module and thyristor supply for fast load PFC device..

Nobel Enerji Mühendislik Ltd Şti (Antalya) 0242 2288250 -02/03/2012

EKM90 and two pieces EKD60 set-up.

Saray Kimya Ltd Şti (Ankara) 0312 8154364-23/02/2012

EKT150 and EKT110 set-up. 2,5 kvar correction stap and 64 step correction.

Yesa Enerji Mühendislik Ltd Şti (İstanbul) 0212 8720808- 09/02/2012

EKM90 thyristor and control module. Fotograf

Gürerel Elektrik Elektronik Ltd Şti (Adana-Galmetsan Ltd. Şti.) 0322 421 0465- 04/02/2012

EKM90 set-up, 1 kvar step correction and 32 step. Unbalanced phase loads and fast changing load PFC.

Asya Grup Mühendislik Ltd Şti (Ankara) 312 2454441-06/01/12

EKT310 set-up, 5 kvar correction step and 32 step PFC. With Harmonic filter and Thyristor switching.

Gürerel Elektrik Elektronik Ltd Şti (Adana-Kareks A.Ş.) 0322 421 0465- 01/02/2012

3 pcs EKD 30/60 and one EKM180 devices will be used for PFC of spot welding devices. 2. Spot Welding line..

Yesa Enerji Mühendislik Ltd Şti (İstanbul) 0212 8720808- 16/01/2012

EKM 45 set-up. 0,25 kvar correction step and 64 step total. Thyristor switching and harmonic filtered.

Gürerel Elektrik Elektronik Ltd Şti (Adana) 0322 421 0465- 19/12/2011

EKM45 set-up, 0,5 kvar step correction and 32 step total. Unbalanced loads at the showroom compensated by EKM PFC device..

Northel Enerji A.Ş. (Balıkesir)-0266 3315770-17/02/2012

PFC of Wind Turbunes of 75 kW and 25 kW with EKT95 and EKT27,5. Continious PFC  at Bidirectional energy flow with thyristor swtitching and harmonic filtered devices.

Yesa Enerji Mühendislik Ltd Şti (İstanbul) 0212 8720808- 09/12/2011

EKM 90 set-up. 0,5 kvar correction step and 64 step at ecah phase. 20 ms correction speed, current transformer is from MV side, PFC connected to LV side.

Gürerel Elektrik Elektronik Ltd Şti (Adana-Kareks A.Ş.) 0322 421 0465- 25/12/2011

3 pcs EKD 30/60 and one EKM180 devices will be used for PFC of spot welding devices.

Northel Enerji A.Ş. (Balıkesir)-0266 3315770- 14/11/2011

EKT19 set-up. 1.5 kvar correction step and 16 step total. For wind turbine bidirectional energy PFC with thyristor switching and garmonic filtered.

Yesa Enerji Mühendislik Ltd Şti (İstanbul) 0212 8720808- 14/10/2011

2 pieces EKM 45 set-up. 0,5 kvar correction step and 32 step total. Thyristor switching and harmonic filtered.

Askar Elektrik (Ankara) -0312 8861313-16/09/2011

EKM 180 set-up, 1 kvar each step at each phase and 64 step total. The factory has many spot welding devices.

PMI Energy Ltd Şti (İstanbul-Mozambique Export) 0212 3203595- 11/11/2011

EKT 760 set-up, 40 kvar ecah step and 32 step total. 20 ms switching speed with harmonic filter PFC.

Fotograf

PMI Energy Ltd Şti (İstanbul-Mozambique Export) 0212 3203595- 11/11/2011

EKT 620 set-up, 10 kvar ecah step and 64 step total. 20 ms switching speed with harmonic filter PFC.

Fotograf Fotograf1

PMI Energy Ltd Şti (İstanbul-Mozambique Export) 0212 3203595- 11/11/2011

EKT 390 set-up, 10 kvar ecah step and 64 step total. 20 ms switching speed with harmonic filter PFC. Fotograf

PMI Energy Ltd Şti (İstanbul-Mozambique Export) 0212 3203595 - 11/11/2011

2 pieces EKT 190 set-up, 5 kvar ecah step and 64 step total. 20 ms switching speed with harmonic filter PFC.

Fotograf

PMI Energy Ltd Şti (İstanbul-Mozambique Export) 0212 3203595- 11/11/2011

EKT 55 set-up, 2.5 kvar ecah step and 32 step total. 20 ms switching speed with harmonic filter PFC.Fotograf

Saruhan Grup Ltd. Şti. (Düzce tesisleri) - 0312 4418576- 24/09/2011

EKM90 set-up, 1 kVAr correction step at ecah phase and 32 step PFC system.

Esen-El Mühendislik Ltd. Şti. (İstanbul) -0212 8861313-14/09/2011

EKM360 set-up, 2 kvar correction step and 64 step at each phase, 20 ms correction speed. PFC of Electric motors that are frequently on and off and unbalanced load. fotograf 

Northel Enerji A.Ş. (Balıkesir)-0266 3315770- 15/09/2011

EKT95 set-up, 2,5 kvar each step and 39 step total. Produced for 75 kW Wind Turbine bi-directional PFC. fotograf fotograf1

Netlog Lojistik Tuzla (İstanbul) - 0216 58501700-18/08/2011

EKM45 set-up. 0,25 kvar each step and 64 step totally. Current transformer at MV side and PFC device is connected to LV side, correcting unbalanced and fast changing loads.

Form Metal Makina San Ltd Şit (Ankara) - 0312 2670741-18/08/2011

EKM45 set-up, 0,5 kvar each step and 32 step totally at each phase. For unbalanced and fast changing reactive power compensation. fotograf

Aslan Mühendislik (Trabzon) - 0462 2291153-19/08/2011

EKT620 set-up, 10 kvar correction step, 64 step, 20 ms correction speed. PFC for big cranes at Seaport. fotograf

İzmakpar Makina Kalıp San. Tic. Ltd. Şti. ( Bursa ) - 0224 4111390-15/08/2011

EKM360 set-up, 4 kvar correction step and 32 step, 20 ms correction speed. A lot of Spot Weilding machines in a production factory.

Northel Enerji A.Ş. (Balıkesir)-0266 3315770- 27/07/11

EKT 19 set-up for 10 kW Wind Turbine bi-directional PFC.

Huhtamaki Ambalaj San. A.Ş. (İstanbul)-0212 886 8190- 30/06/11

EKT 620 set up, 19 kvar correction step and 64 step. 20 ms correction speed.

Sürteks Ltd Şti (Şanlı Urfa) 0414 3146879- 23/06/2011

EKT 310 set-up, 5 kavr correction step and 64 step. Main loads are high power electric motors, frequently on-off, in the factory. Thyristor controlled switching and 20 ms correction speed..

Soyut Yapı ve Müh. A.Ş. (Ankara) 0312 4688750 - 25/04/2011

EKT150 set-up, 2,5 kvar correction step and 64 step. PFC device used for 200 kW Wind Turbine bidirectional PFcompensation. Fotograf 

Elpsis Enerji Ltd. Şti. (Denizli) 0258 2511178 - 11/03/2011

2 pieces, EKM 9 setup.

Tekman Metal Ltd Şti (Amasya-Merzifon) 0358 5132313 - 08/03/2011

EKT310 set-up, 5 kvar correction step, 64 step total, 20 ms switching..

Elpsis Enerji (Denizli) 0258 2511178 - 04/03/2011

EKM 9 setup.

Tek-El Makina Ltd Şti (Ankara) 0312 3541634- 04/03/2011

EKT 310 set-up, 5 kavr correction step and 64 step. Main loads are cranes and welding devices in the factory. Thyristor controlled switching and 20 ms correction speed. Fotograf

OMS Paslanmaz (İstanbul) 0212 6890523- 03/02/2011

EKM 90 SET UP, 0,5 KVAR CORRECTION STEP AT EACH PHASE, 64 STEP. FAST CHANGING AND UNBALANCED LOADS EXIST. MV APPLICATION

Ankara Hamak Kompresör A.Ş. (Ankara) 0312 8144577- 03/02/2011

EKT 150 set up, 2,5 kvar correction step, 64 step, 20 ms correction speed. Compressor loads are fast changing due to testing.

BKT Enerji (Eskişehir) 0222 2176769 (Ayraf Tel Ürünleri Ltd Şti)- 20/01/2011

EKM270 set-up, 64 step , 2 kvar each correction step, 189 Hz harmonic filters accomodated.. Three single-phase EKM module working 20 ms switching speed and multiple step switching. Reactive problem has been corrected.

Bemis Elektrik (Bostaş Enerji-Ankara) 0224 3633065-06/01/2011

EKT310 set-up, 5 kvar correction step and 64 step. PFC device used for 350 kW Wind Turbine bidirectional compensation.Fotograf Fotograf1

Kamer Elektrik Ltd Şti (Konya)-0332 3511365-14/10/2010

EKM 45 set-up, 0,5 kVAr correction step and 32 step PFC system. Current referance from MV, correction from LV side application.

Fotograf  Fotograf1

Yılmaz Termoform (İstanbul)-0212 7711868-15/10/2010

EKM90 set-up, 0,5 kVAr correction step and 64 step PFC system. Current referance from MV, correction from LV side application. Fotograf

PMI Energy Ltd Şti (İstanbul-Mısır export) 0212 3203595-06/10/2010

2 pcs. 620 set-up, parallel working, 10 kvar correction step and 64 step..Fotograf

PMI Energy Ltd Şti (Çağrı Elektrik A.Ş.-İstanbul) 0212 3203595-02/09/2010

EKT 310 set-up. 5 kvar correction step and 64 step.

Nobel Enerji Mühendislik Ltd Şti (Ser-Gün Isı-Antalya) 0242 2288250-05/08/2010

EKM360 set-up, 2 kvar correction step and 64 step at each phase. 100 ms duration of spot welding machines that work two phase.

Emek Elektrik (Kaleliler Ltd- Ankara) 312 3980181-24/08/2010

EKD240 and EKM 90 set-up. EKD 240 used for two phase working induction device compensation, the device has fast changing load. EKM 90 used for central PFC.Fotograf  Fotograf1

KMD Elektronik LTD Sti (Lokman Hekim Hastanesi-Ankara) 0312 4739292-11/10/2010

2 set of EKT 620 and 2 set of EKM45 set-up. The hospital has two transformer, each 1000 kVA. EKM 45 used to compensate enductive value of transformers by taking current information from MV side. Old PFC system has been modified to thyristor switching system. Once   Sonra  OG Kompanzasyonu

LMS Enerji Ltd Şti (Kartal Meiser-Ankara) 0312 3946606-21/07/2010

EKT1240 set-up, 10 kvar correction, 64 step correction. tTwo EKT 620  will work parallel. High power spot welding device PFC.

PMI Energy Ltd Şti (Çağrı Elektrik-İstanbul) 0212 3203595-06/07/2010

2 pieces EKM 45 set-up. 0.5 kvar correction and 32 step at ecah phase. MV compensation at LV side with special software and current information from MV side.

Teknoloji Elektrik (Isparta) 0246 223 72 88-07/07/2010

EKT 37,5 set-up, 2.5 kvar correction, 16 step. Fast changing three phase loads causing reactive energy limit punuishment.

Uçar Elektrik (İstanbul) 0216 3795459-09/06/2010

EKT 75 set-up. 2.5 kvar correction, 32 step correction. A factory that has three phase loads in general, the loades are changing frequently.

Elpsis Enerji (Denizli) 0258 2511178-20/04/2010

2 pieces EKM 9 set-up. Installed and entegrated in high power PFC panel to compensate single phase loads and fast changing loads.Video

Elkomsis (Kırıkkale Üniversitesi) 0312 2551739-14/01/2010

EKT 2150 set-up, three EKT 620 and one EKT 310 working parallel. Long MV cables creating capacitive effect during summer and inductive loads collected before meter and the difference of inductive and capacitive has been compensated. Current information taken from MV (before meter) and compensation connected LV side. FotografFotograf1

Elpsis Enerji (Denizli) 0258 2511178-17/02/2010

EKM 160 set-up, each phase 54 kvar total correction correction step is 1 kvar. The factory has three fast changing spot welding. Fotograf Fotograf1 Video

PMI Energy (İstanbul-Egypt Export) 0212 3203595-11/02/2010

2 pieces EKT 150 set-up. 2.5 kvar correction and 64 step. 20 ms correction speed and harmonic filter installed.FotografFotograf1

Öykü Gıda Ltd Şti (Ankara) 0312 8151072-28/01/2010

EKT 150 set up, 2,5 kvar 64 step correction. 110 kva generator was not able to feed all macnines in the factory, after EKT 150 generatör was able to work with all machines.Video

Berçinler Elektrik Ltd Şti (Samsun) 0362 4320914-19/12/2009

EKT 35 PFC set up, correction step 2,5 kvar and 16 step correction. There are four cranes and EKT will work with old system to compansate fast changing crane loads. Fotograf

Güney Çelik Hasırve Demir Mamulleri A.Ş. (Gebze) 0262 7542222-29/09/2009

EKM360 and EKT 310 PFC set up. The loads are fast changing 100 ms and sometime unbalanced. Video

Elkomsis (İstanbul Ece Metal) 0312 2551739-10/12/2009

EKM 90 PFC set-up, 1 kvar resolution and 32 step correction at each phase individually. The loads are fast changing and unbalanced.

Çakıl Köyü Water Pump Building (Balıkesir) 0535 3812809-05/12/2009

EKT 27.5 set up.

AYT Restaurant (Ankara) 0312 8152627-26/10/2009

EKM 22.5 set-up, 32 step, 0,25 kvar correction step. The facility has unbalanced phase loads.

Elkomsis (Ankara) 0312 2551739-17/09/2009

EKM 45 set-up, 6 tryristor, and 64 step correction, 0,25 kvar correction. MV compensation at LV side with special software.

PMI Energy (İstanbul-Chile Export) 0212 3203595-14/10/2009

EKM 45 Set-up, each phase has 15,5 kvar, correction step 0,5 kvar. The factory has unbalanced loads.

Elkomsis (Ankara) (Form Metal Sincan OSB)-14/09/2009

EKT 150 Set-up, 6 thyristor module, 64 step, 2.5 kvar correction, included 189 Hz harmonic filters. The loads are balanced, fast changing. welding devices presses and CNC machines available.

Ata Demir Ltd Şti (Ankara) 0312 8151397-25/08/2009

EKT 75 set-up, 2.5 kVAr correction step, 32 step correction. The loads are balanced and fast changing. It is working paralled with 120 kVAr old system.Fotograf

Metod Tasarım Ltd Şti (Ankara) 0312 8151153-07/08/2009

EKM 22.5 set-up. The fabric has unbalanced phase loads. fotograf

Elkomsis (Ankara)-30/07/2009

EKT 310 set up, 64 step correction, 5 kVAr correction step. An university campus MV transformer PFC at LV side. Data from, OG side. Fotograf

Elkomsis (Ankara)-18/07/2009

EKM 22.5 set-up. MV transformer compensation at LV side. Fotograf

Geoplas Ltd Şti (Sincan OSB-Ankara) 0312 2671627-20/07/2009

EKM 135 set-up. The fabrik had problem with long distance between PFC and energy transformer. Fotograf The reactive power capacity increased to 180 kvar due to capacity increase at factory.

Termik Elektrik (Mayda Toz Metalurji Bursa) 0224 2352693-17/03/2009

EKM 90 set-up. The loads are unbalanced and frequently changing, also high harmonic problem exist due to thyristor controlled oven. Fotograf

OES Ltd Şti (Alga Mühendislik İstanbul)-19/02/2009

EKM 45 set-up. A building that has low loads but high harmonics . Fotograf

OES Ltd Şti (Yenen Mühendislik İstanbul) 0312 2567755-30/05/2009

EKM 45 Set-up. The loads are unbalanced and changing frequently in that LPG pump production factory. Fotograf

Elkomsis (Ankara) 0312 2551739-27/01/2009

EKM 22,5 set-up. The workshop that has low and unbalanced loads. Fotograf

Termik Elektrik 0224 2352693 (Bursa Custom) -21/01/2009

EKM 45 Set-up at Bursa Gümrük Müdürlüğü building. There are load differences between phases.

OES Ltd Şti (Teknik Katı Atık Gebze)-29/12/2008

EKT 310 set-up. Hard Waste processing factory. Fotograf

Elkomsis (Ankara Tarım ve Köy İşleri Bakanlığı)-28/11/2008

EKM 90 Set-up at TC Köy İşleri Bakanlığ building. There are load differences between phases.

Elkomsis (Ankara-Harita Genel Komutanlığı)-12/11/2008

EKM 45 Set-up at military building, 64 step correction. There is load difference between phases.

Karmet A.Ş. Factory (Ankara)-13/07/2008

EKM 90 and EKT 75 set-up

OES Ltd Şti (Ankara)-03/07/2008

EKM 22.5 Set-up

İnforise (TKG Otomotiv Bursa)-04/06/2008

EKM 360 Set-up at Bursa, an Automotive company where high capacity spot welding devices working. There is difference between loads of each phase and changing the loads very frequent and quick (200 ms). Fotograf

Elkomsis (Ankara-Anka Cam)-31/05/2008

EKM 45 Set-up. EKM working parallel with old system. There are load differences between phases and the load changes frequently.

Karmet Makina Elektronik Tasarım A.Ş. aşağıdaki konularda Ar-Ge faaliyetleri yürütmektedir.

1.Mekanik Konstrüksiyon; Hertür mekanik giydirme ihtiyacınız için tasarım personelimiz ve prototip çalışmalarımız devam etmektedir.

2.Elektronik Ürünler; Firma güncel ihtiyaçlar doğrultusunda yüksek teknoloji içeren yazılım ve donanıma sahip ürünler konusunda çalışmalar yürütmektedir. Projelerin bir kısmı Tübitak desteklidir.

 

Düşük ve yüksek güçte anahtarlama yapabilen EKM ve EKT serisi cihazlarda beş kolda 32 kademe ve 6 kolda 64 kademe hassasiyet sağlayan Kontrol kartı ve Tristör Modülü mevcuttur. 

modül

modül310

 

 

 

 

       

 

 

 

 

 

EKT 75 Control Module                                                                                                      EKT 310 Control Module

 

 ekkm

ekkm

 

 

PMI Elektrik ve Elektronik Sistemleri Dis Tic. Ltd. Sti.

Tel : +90 212 320 35 95 - 320 35 96

Fax : +90 212 320 35 97

www.pmienergy.com

ISO 9001

ISO 9001

EKM-EKT User Manuel

EKM-EKT User Manuel

Broşür 2011

Broşür 2011

Sektörel Reaktif Güç Tüketim Davranışları

Sektörel Reaktif Güç Tüketim Davranışları

Karmet Broşür

Karmet Broşür

EKM-EKT Kullanıcı El Kitabı

EKM-EKT Kullanıcı El Kitabı

Reaktif Cezadan Kurtarılan Bir müşterimiz

Reaktif Cezadan Kurtarılan Bir müşterimiz

PFC Brochure

PFC Brochure

EKM-EKT Kompanzasyon

EKM-EKT Kompanzasyon

EKKM Elektronik Kontrol ve Kompanzasyon Modülü

EKKM Elektronik Kontrol ve Kompanzasyon Modülü

Standart Kompanzasyon Karşılaştırması

Standart Kompanzasyon Karşılaştırması

EKM Bağlantısı

EKM Bağlantısı

EKM_ING Broshure

EKM_ING Broshure

EKM ve Standart Kompanzasyonun Paralel Bağlanması

EKM ve Standart Kompanzasyonun Paralel Bağlanması

Menüden içeriği seçiniz.

Menüden içeriği seçiniz.

Menüden içeriği seçiniz.

Menüden içeriği seçiniz.

Dimension of Cabinets are 3700*3500*2400 mm.

cncKabin


 «« Previous Next »»

More than 4 years, Karmet produce fast PFC devices and solve reactive energy problems with over 50000 hours MTBF. 06/01/2012


 «« Previous Next »»

PMI Energy introduced Karmet and GESS products at Hannover Messe in April 2011.  Visitors have interest in wide range of electronic production of the group.

Hannover


 «« Previous Next »»

Bostaş Enerji and Bemis Grup partnership has set-up a wind turbine in Bulgaria and choose Karmet PFC device. Karmet PFC for Wind Turbine has bi-directional current sensing and correction at both current direction. Fast Karmet PFC device has thyristor controlled switching and 189 Hz harmonic filters at each branch.  

 

 

 

ruzgar1

 

 

 

 

 

 

 

 

 

 

 

 

 ruzgar2

 

 


 «« Previous Next »»

Two PFC panels of 600 kVAr revised by addinh harmonic filters and thyristor modules. The old panels and capacitors at good condition have been used for economical application. Because the hospital has cogeneration sytem, old PFC were off position during revers currents. New EKT system also solved this problem working bi-directional. Also two EKM45 models PFC used to compensate 1000 kVA transformers enductivity, by measuring current MV side and connecting PFC devices to LV side. By this aplication high sensitive correction of system PFC done. Meter monitoring system has been adapted also.

 

LHOGLH


 «« Previous Next »»

Because of total load is higher than generator capacity, 110 kVA generator was not able to feed 90 kW active power of fabric. Also company had PFC system problem, that caused company pay reactive energy fee. After EKT PFC device installed, then the generator was able to work and feed full system and no penalty is paid due to reacitve power.

 

Firmanın teyit yazısı.  Video 


 «« Previous Next »»

PMI Energy attended Egypt Electricx 2009 Fair. The sector has a high interest in Karmet PFC

Mısır fuarı

Mısır fuarı

 

mısır


 «« Previous Next »»

Fair will start and Karmet will be at Hall 8 D240. Karmet will meet the customer who need economical solutions for their fast changing and balanced phases. Thyristor controlled three phase PFC devices has similar specification as Electronic Compansation Modules.


 «« Previous Next »»

Karmet Makina Elektronik Tasarım A.Ş. Set-up EKM 360 at an Automotive factory in Bursa. Trial session of the EKM has saccessfully finished. The factory has unbalanced and fast changing loads, spot weldig devices. Single phase correction of reactive energy with EKM 360 is very succesfull at the factory. Each module has 124 kvar capacity and individually corrects the PF.

ekm360


 «« Previous Next »»